1

Firefighting Quick Coupler Casting

• Aluminum firefighting quick coupler casting
• Investment casting with CNC cam lugs and sealing face
• Lightweight body for fire hose assemblies
• Hydrostatic pressure test available

  • China
  • New product development: 2 months; precision casting production: 1.5 months; schedule can be adjusted according to production conditions.
  • 1,000 tons per year (precision casting)
  • Information

Firefighting Quick Coupler Casting

Product Overview

If a fire hose coupling cracks under pressure, leaks at the connection, or binds when the crew needs a fast connection, the result is a safety problem. This firefighting quick coupler casting is made to remove these risks. It is poured as an investment casting in lightweight aluminum alloy in our own foundry, and the cam lugs and sealing face are machined on site. The fire hose coupling is supplied as an aluminum fire fitting, so the buyer deals with the foundry and not with a trader.

Firefighting quick coupler casting with GIAHAR logo

The table below gives the normal working range for this coupler.

The aluminum fire hose coupling is the quick-connect interface between hoses. It locks securely and holds the water pressure. Every part is cast and machined on site, so the buyer deals with the foundry and not with a middleman.

ParameterValue
MaterialAluminum Alloy (other fire-rated alloys on request)
Casting ProcessInvestment Casting
Key Machined FeaturesCam lock lugs, sealing face, hose barb threads
Pressure RatingPer fire hose standard / customer requirement
CustomizationPer national / international fire coupling standard
Finish and packingFinish: As-cast, machined, passivated or pickled.
Packaging: The machined faces get anti-rust fluid, extra face protection and impact protection for transit. The export pack can be an export carton, a fumigated or non-fumigated wooden crate, an EU-standard box or a pallet. The packing can be adapted to the customer requirement.
Environmental compliance: For EU shipments the packaging follows PPWR Regulation (EU) 2025/40 from 12 August 2026.

Manufacturing Process

The cast coupler body is light, holds its dimensions and is dense enough for the fire pump pressure. The cam lock lugs and sealing face are CNC machined after casting, so the coupling locks without binding.

Why Precision Casting Matters

The coupler is used on municipal fire hose assemblies, industrial fire suppression systems, fire truck plumbing and hose manufacturing lines. It is also supplied as a replacement part when an existing aluminum coupling has worn lugs or a damaged sealing face.

Application Industries

This precision cast fire equipment part is used in municipal fire department hose assemblies, industrial fire suppression systems, fire truck plumbing, and fire hose manufacturing.

Quality Control

The quick coupler body is made to the customer’s standard or drawing. A special size, a non-standard thread or a proprietary coupling design can be reviewed; the drawing is checked for casting feasibility and a formal quotation is sent within 1–2 working days.

Custom Service

We manufacture quick coupler bodies to your standard or custom drawing. If you need a special size, non-standard thread, or a proprietary coupling design for your fire equipment line, send us your drawing. Our engineering team reviews casting feasibility and sends you a formal quotation in 1-2 working days.

Custom Manufacturing Process

1. Requirement Communication
We start with the drawing, the application and the order quantity. Material, dimensions, tolerances, operating conditions and any packing or documentation requirement are recorded before quoting.

2. Technical Evaluation
The engineering team reviews wall sections, machining stock, casting feasibility and the critical fits. If a feature is difficult to cast or machine, it is raised before tooling begins.

3. Process and Sample Confirmation
The process route is fixed, and a sample is produced when the project requires one. The sample is checked against the drawing and confirmed before mass production.

4. Mass Production
Mass production is arranged against the confirmed specification and the order quantity. The progress is tracked through casting, machining and finishing, and the quality control is carried out during the whole manufacturing process.

5. Quality Inspection
Dimensional and visual checks are carried out according to the agreed requirements. Inspection records are kept with the batch.

6. Packaging and Delivery
Finished parts are packed for export, labelled as agreed and prepared for shipment with the required documents.

The lug spacing, thread fit and sealing face flatness are checked on every part. A hydrostatic pressure test can be arranged on request to verify the coupler holds the rated pressure without weeping. Material certificates are supplied with the order.

style="color:#0F4C81; border-bottom:3px solid #0F4C81; padding-bottom:8px; margin-bottom:20px;">Firefighting Quick Coupler Casting

Product Overview

If a fire hose coupling cracks under pressure, leaks at the connection, or binds when the crew needs a fast connection, the result is a safety problem. This firefighting quick coupler casting is made to remove these risks. It is poured as an investment casting in lightweight aluminum alloy in our own foundry, and the cam lugs and sealing face are machined on site. The fire hose coupling is supplied as an aluminum fire fitting, so the buyer deals with the foundry and not with a trader.

The table below gives the normal working range for this coupler.

The aluminum fire hose coupling is the quick-connect interface between hoses. It locks securely and holds the water pressure. Every part is cast and machined on site, so the buyer deals with the foundry and not with a middleman.

ParameterValue
MaterialAluminum Alloy (other fire-rated alloys on request)
Casting ProcessInvestment Casting
Key Machined FeaturesCam lock lugs, sealing face, hose barb threads
Pressure RatingPer fire hose standard / customer requirement
CustomizationPer national / international fire coupling standard
Finish and packingFinish: As-cast, machined, passivated or pickled.
Packaging: The machined faces get anti-rust fluid, extra face protection and impact protection for transit. The export pack can be an export carton, a fumigated or non-fumigated wooden crate, an EU-standard box or a pallet. The packing can be adapted to the customer requirement.
Environmental compliance: For EU shipments the packaging follows PPWR Regulation (EU) 2025/40 from 12 August 2026.

Manufacturing Process

The cast coupler body is light, holds its dimensions and is dense enough for the fire pump pressure. The cam lock lugs and sealing face are CNC machined after casting, so the coupling locks without binding.

Why Precision Casting Matters

The coupler is used on municipal fire hose assemblies, industrial fire suppression systems, fire truck plumbing and hose manufacturing lines. It is also supplied as a replacement part when an existing aluminum coupling has worn lugs or a damaged sealing face.

Application Industries

This precision cast fire equipment part is used in municipal fire department hose assemblies, industrial fire suppression systems, fire truck plumbing, and fire hose manufacturing.

Quality Control

The quick coupler body is made to the customer’s standard or drawing. A special size, a non-standard thread or a proprietary coupling design can be reviewed; the drawing is checked for casting feasibility and a formal quotation is sent within 1–2 working days.

Custom Service

We manufacture quick coupler bodies to your standard or custom drawing. If you need a special size, non-standard thread, or a proprietary coupling design for your fire equipment line, send us your drawing. Our engineering team reviews casting feasibility and sends you a formal quotation in 1-2 working days.

Custom Manufacturing Process

1. Requirement Communication
We start with the drawing, the application and the order quantity. Material, dimensions, tolerances, operating conditions and any packing or documentation requirement are recorded before quoting.

2. Technical Evaluation
The engineering team reviews wall sections, machining stock, casting feasibility and the critical fits. If a feature is difficult to cast or machine, it is raised before tooling begins.

3. Process and Sample Confirmation
The process route is fixed, and a sample is produced when the project requires one. The sample is checked against the drawing and confirmed before mass production.

4. Mass Production
Mass production is arranged against the confirmed specification and the order quantity. The progress is tracked through casting, machining and finishing, and the quality control is carried out during the whole manufacturing process.

5. Quality Inspection
Dimensional and visual checks are carried out according to the agreed requirements. Inspection records are kept with the batch.

6. Packaging and Delivery
Finished parts are packed for export, labelled as agreed and prepared for shipment with the required documents.

The aluminum fire fitting is supplied as a quick coupler casting with the cam lugs and sealing face machined to the drawing.

Company Profile & FAQ

At a Glance
Founded2010
Factory AreaAbout 60,000 m² in Kazuo County, Liaoning
StaffAround 120 people, including engineers and QC
Experience16 years of silica sol investment casting
Export MarketsJapan, South Korea, Europe and North America
Capacity1,000 tons per year of precision castings
CertificationsDNV ISO 9001 Quality Management System Certificate; TUV PED 2014/68/EU Pressure Equipment Certificate
DNV ISO 9001 Quality Management System Certificate
DNV ISO 9001
TUV PED 2014/68/EU Pressure Equipment Certificate
TUV PED 2014/68/EU
FAQ
Q: Can you produce parts from my drawing or sample?
Yes. Send a 2D drawing, a 3D model or a physical sample. Our engineer will review the wall sections, tolerances and machining stock before quoting. Any risk is raised before the sample stage.
Q: Can you do machining, heat treatment and surface finishing in-house?
Yes. The castings are moved from our foundry to our CNC shop. Stress relief is carried out after the casting, and solution annealing can be done in our controlled furnace when the material specification requires it. Passivation and pickling are also handled on site. Since the same team controls casting, heat treatment and finishing, the parts do not have to travel between different vendors, which reduces the handling damage and keeps the production route short.
Q: What are the MOQ and lead times?
MOQ is normally 100–500 pcs for new tooling, with lower quantities for repeat orders. New product development takes about 2 months, while the precision casting production takes about 1.5 months. The final schedule is confirmed against the drawing, the order quantity and the current production load.

Fire Coupler FAQ

Product-Specific FAQ
Q: What material is the coupler made from?
Aluminum alloy is the standard material for a lightweight fire hose coupling. Other fire-rated alloys can be reviewed when the specification calls for them.
Q: Does the coupler hold fire pump pressure?
The body is machined and pressure tested to the rating on the drawing. A hydrostatic test can be arranged before shipment.
Q: Can you match a fire hose standard?
Yes. Send the standard, the thread and the lug pattern. The sealing face and cam lugs are machined to the drawing.
Q: Can you copy an existing coupler?
Yes. Send a sample or a 2D/3D drawing. We check the lug spacing, thread and sealing face before quoting.
Exhibition Activities
Welcome to 2023 SUBCON in UK
Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.