1

Underwater Juction Box Casting

• 316L underwater junction box casting
• Silica sol investment casting, pressure-tight body
• Sealing groove, connector ports and bolt holes CNC machined
• Hydrostatic pressure test available

  • China
  • New product development: 2 months; precision casting production: 1.5 months; schedule can be adjusted according to production conditions.
  • 1,000 tons per year (precision casting)
  • Information

Underwater Junction Box Casting

Product Overview

If an underwater junction box leaks at depth, corrodes after months in seawater, or fails a pressure test because of hidden porosity, the result is a costly subsea failure. This underwater junction box casting is made to remove those problems. It is poured as a silica sol investment casting in 316L stainless steel in our own foundry, and the sealing faces are machined on site. The 316L junction box is supplied as a subsea enclosure, so the buyer deals with the foundry and not with a trader.

Underwater junction box casting with GIAHAR logo

The table below gives the normal working range for this junction box.

The subsea electrical enclosure seals the electrical connections and keeps seawater out at the working depth. The casting and the machining are done on the same site. This means the buyer has no middleman between the foundry and the receiving dock.

ParameterValue
Material316L Stainless Steel (other subsea alloys on request)
Casting ProcessSilica Sol Investment Casting
Key Machined FeaturesSealing groove, connector ports, bolt holes for end cap
Pressure RatingPer subsea depth rating / customer requirement
CustomizationPer customer drawing / underwater sensor design
Finish and packingFinish: As-cast, machined, passivated or pickled.
Packaging: Anti-rust fluid on machined surfaces, with extra protection for machined faces and impact protection to prevent transit damage. Export carton, fumigated wooden crate, non-fumigated wooden crate, EU-standard box or pallet. Packaging can be customized to customer requirements.
Environmental compliance: Our product packaging complies with Regulation (EU) 2025/40 on Packaging and Packaging Waste (PPWR), which applies directly in EU member states from 12 August 2026.

Manufacturing Process

This stainless steel underwater housing is produced by silica sol investment casting. Sand cast housings can have hidden porosity that lets seawater seep in over time, and the rough sealing faces may never hold a reliable O-ring seal. The investment cast box is dense, and the sealing groove is CNC machined to the tolerance required for a secure O-ring.

Why Precision Casting Matters

Subsea enclosures have to hold back hundreds of meters of water pressure for years, with no maintenance possible once deployed. Our precision cast subsea junction box has consistent wall thickness and zero casting defects, so it never deforms or leaks at depth. The 316L material resists long-term seawater corrosion, no pitting, no rust through.

Application Industries

This investment cast underwater electrical housing is widely used in subsea sensor systems, offshore oil and gas instrument packages, underwater ROV components, marine observation equipment, and tidal power generation monitoring systems.

Quality Control

If the customer asks for it, the box is put on the pressure bench and held at the depth pressure for the agreed time. Before packing, the box is held at the rated pressure for the agreed time and the sealing groove is checked for weeping.

Custom Service

We make underwater junction boxes to your 2D drawings, 3D models, or existing enclosure samples. If you have a custom subsea sensor design that needs a pressure-rated enclosure, send us your files. Our engineering team reviews casting feasibility and sends you a formal quotation in 1-2 working days.

Custom Manufacturing Process

1. Requirement Communication
We start with the drawing, the application and the order quantity. Material, dimensions, tolerances, operating conditions and any packing or documentation requirement are recorded before quoting.

2. Technical Evaluation
The engineering team reviews wall sections, machining stock, casting feasibility and the critical fits. If a feature is difficult to cast or machine, it is raised before tooling begins.

3. Process and Sample Confirmation
The process route is fixed, and a sample is produced when the project requires one. The sample is checked against the drawing and confirmed before mass production.

4. Mass Production
Mass production is arranged against the confirmed specification and the order quantity. The progress is tracked through casting, machining and finishing, and the quality control is carried out during the whole manufacturing process.

5. Quality Inspection
Dimensional and visual checks are carried out according to the agreed requirements. Inspection records are kept with the batch.

6. Packaging and Delivery
When the parts are finished, they are packed for export and labelled in the way that has been agreed, then prepared for shipment together with the documents required for the order.

The 316L junction box is supplied as a subsea enclosure with a machined sealing groove.

Company Profile & FAQ

At a Glance
Founded2010
Factory AreaAbout 60,000 m² in Kazuo County, Liaoning
StaffAround 120 people, including engineers and QC
Experience16 years of silica sol investment casting
Export MarketsJapan, South Korea, Europe and North America
Capacity1,000 tons per year of precision castings
CertificationsDNV ISO 9001 Quality Management System Certificate; TUV PED 2014/68/EU Pressure Equipment Certificate
DNV ISO 9001 Quality Management System Certificate
DNV ISO 9001
TUV PED 2014/68/EU Pressure Equipment Certificate
TUV PED 2014/68/EU
FAQ
Q: Can you produce parts from my drawing or sample?
Yes. Send a 2D drawing, a 3D model or a physical sample. Our engineer will review the wall sections, tolerances and machining stock before quoting. Any risk is raised before the sample stage.
Q: Do you provide material certificates and inspection reports?
Mill certificates to EN 10204 3.1, heat treatment records and dimensional reports can be supplied. PED 2014/68/EU documentation and a hazardous-substance-free declaration covering RoHS and REACH are also available. The required document package is confirmed at quotation.
Q: Can you do machining, heat treatment and surface finishing in-house?
Yes. The castings are moved from our foundry to our CNC shop. Stress relief is carried out after the casting, and solution annealing can be done in our controlled furnace when the material specification requires it. Passivation and pickling are also handled on site. Since the same team controls casting, heat treatment and finishing, the parts do not have to travel between different vendors, which reduces the handling damage and keeps the production route short.
Q: Which standards do you work to?
European work generally follows ISO. Customer-specific standards are reviewed against the drawing, and the inspection standard is confirmed before the order is released.
Q: What are the MOQ and lead times?
MOQ is normally 100–500 pcs for new tooling, with lower quantities for repeat orders. New product development takes about 2 months, while the precision casting production takes about 1.5 months. The final schedule is confirmed against the drawing, the order quantity and the current production load.

Underwater Junction Box FAQ

Product-Specific FAQ
Q: What depth can the box be rated for?
The pressure rating is set by the drawing and the intended operating depth. A hydrostatic pressure test can be arranged to verify the box before shipment.
Q: Why use 316L for a subsea enclosure?
316L resists seawater corrosion and keeps the sealing groove stable. Other subsea alloys can be reviewed when the specification calls for them.
Q: How is the sealing groove checked?
The groove width, depth and surface finish are machined to the drawing and checked before the O-ring is fitted.
Q: Can you copy an existing junction box?
Yes. Send a sample, a 2D drawing or a 3D model. The wall section, the sealing groove and the connector ports are reviewed before the quotation is prepared.
Exhibition Activities
Welcome to 2023 SUBCON in UK
Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.