- Home
- >
- Products
- >
- Pump impeller 316L
- >
Pump impeller 316L
• 316L stainless steel semi-open pump impeller for chemical, wastewater and process pumps
• Silica sol investment casting with in-house CNC machining of bore, keyway and vane profile
• OD 20–650 mm, 0.2–80 kg, dynamically balanced before shipment
• Custom impeller designs reviewed against drawings or worn samples
- China
- New product development: 2 months; precision casting production: 1.5 months; schedule can be adjusted according to production conditions.
- 1,000 tons per year (precision casting)
- Information
Stainless Steel Pump Impeller 316L
A pump impeller is expected to move dirty liquid, resist corrosion and still fit the shaft after years of service. A rough vane surface, a porous wall or a bore that is not concentric will show up as vibration, loss of head or a part that will not fit. This semi-open impeller is cast in 316L by silica sol investment casting, stress relieved, machined and balanced in our own shop. The bore, keyway and vane profile are made to the drawing, and the balance check is completed before packing. Buyers get a replacement impeller that fits the pump and avoids the corrosion problems of cast iron.

The table below gives the normal working range for this impeller. Final dimensions, material grade and inspection level are confirmed from the drawing.
| Material | 316L stainless steel (304 or 316 also available) |
| Casting method | Silica sol investment casting, in our own foundry |
| Outer diameter | 20–650 mm |
| Weight per piece | 0.2–80 kg |
| Vane type | Semi-open, for liquids with fine solids |
| Finish machining | CNC bore, keyway and vane profile to drawing |
| Balancing | Dynamic balancing before shipment |
| Heat treatment | Stress relief after casting; solution annealing on request |
| Inspection | Visual and dimensional check; material certificate |
| Finish and packing | Finish: As-cast, machined, passivated or pickled. Packaging: Anti-rust fluid on machined surfaces, with extra protection for machined faces and impact protection to prevent transit damage. Export carton, fumigated wooden crate, non-fumigated wooden crate, EU-standard box or pallet. Packaging can be customized to customer requirements. Environmental compliance: Our product packaging complies with Regulation (EU) 2025/40 on Packaging and Packaging Waste (PPWR), which applies directly in EU member states from 12 August 2026. |
Outside diameter, bore, keyway and vane profile are machined to the drawing. Two impellers can look similar outside and have different vane angles or hub details, so the quotation is based on the drawing, material and inspection requirements. Precision casting capacity is 1,000 tons per year, and the origin is China.
Why the Vane Shape Matters
The semi-open vane allows fine solids to pass through the pump instead of trapping them between the blades. This is useful in wastewater, chemical transfer and process duties where the liquid is not perfectly clean. A closed impeller may handle a higher head, but it can clog when the solids build up. The open shape is easier to clean and less likely to stop the pump.
The vane profile also affects the balance. If one passage is thicker or the blade angle is different, the impeller will pull to one side when it spins. The vane itself is made from a wax pattern that is kept under control, and after the machining step the profile is checked once more, so that the impeller can run without shaking in the pump.
Casting and Machining
We use silica sol investment casting for this impeller. It gives a smoother surface and fewer internal pores than sand casting, which matters when the part spins fast and the liquid contains chlorides. The 316L heat is tracked, and the casting is stress relieved after shakeout. This helps hold the bore and vane dimensions during machining.
The castings go directly to our CNC shop. We machine the bore, keyway and vane profile, then balance the impeller before packing. First-off parts are checked before serial production, and the operator monitors the critical dimensions through the run. Since the foundry and the machine shop are located on the same site, any problem with a wall section or a port position can be found and corrected before the next batch is poured.
Material and Corrosion
316L is the standard grade for this impeller. It handles chloride and mild chemicals better than 304, and it is a practical choice for wastewater and chemical transfer. 304, 316 and other grades can be reviewed when the pumped fluid is less aggressive or the customer has a preferred specification.
The material grade is confirmed from the fluid, concentration, temperature and cleaning routine. If the pump sees strong chlorides or high temperature, tell us before the order is placed; the grade and surface finish may need to change.
Quality Checks
Every batch is checked visually for cold shuts, surface defects and vane damage. Dimensional checks cover the bore, keyway, vane width and overall diameter. A material certificate can be supplied with the inspection documents.
For a replacement impeller, the worn part can be used as a reference. We compare the vane profile and hub dimensions, then confirm the critical fits with the customer before machining.
Custom Manufacturing Process
1. Requirement Communication
We start with the drawing, the application and the order quantity. Material, dimensions, tolerances, operating conditions and any packing or documentation requirement are recorded before quoting.
2. Technical Evaluation
The engineering team reviews wall sections, machining stock, casting feasibility and the critical fits. If a feature is difficult to cast or machine, it is raised before tooling begins.
3. Process and Sample Confirmation
The process route is fixed, and a sample is produced when the project requires one. The sample is checked against the drawing and confirmed before mass production.
4. Mass Production
Mass production is arranged against the confirmed specification and the order quantity. The progress is tracked through casting, machining and finishing, and the quality control is carried out during the whole manufacturing process.
5. Quality Inspection
Dimensional and visual checks are carried out according to the agreed requirements. Inspection records are kept with the batch.
6. Packaging and Delivery
Finished parts are packed for export, labelled as agreed and prepared for shipment with the required documents.
Engineering Support and Cost Control
The drawing review covers the vane angle, hub thickness, bore and keyway, machining allowance and batch size. A small change to the hub or vane can reduce machining time or improve the casting yield. Where the specification allows, we propose a design that is easier to cast and machine without changing the pump performance.
Cost control comes from stable tooling, a repeatable wax pattern and a machining sequence that matches the order quantity. Lowering the material grade or skipping the balance check would reduce the price, but it would move the cost to the pump maintenance budget.
Where It Is Used
This impeller is used in chemical transfer pumps, wastewater pumps, process pumps and drainage pumps. Many customers also buy it as a replacement part when the original cast iron impeller corrodes. Our main markets are Japan, South Korea, Europe and North America.
A stainless steel impeller and a centrifugal impeller are reviewed against the same drawing; the semi-open impeller remains the standard.
Company Profile & FAQ
Pump Impeller FAQ
| Product-Specific FAQ | |
| Q: What size impellers can you cast? | |
| The normal range is 20–650 mm outside diameter and 0.2–80 kg per piece. If the drawing is outside this range, send it for a feasibility check. | |
| Q: Which material is used for corrosive duty? | |
| 316L is the standard grade for chloride and mild chemical service. 304, 316 and other grades can be reviewed when the pumped fluid requires them. | |
| Q: Is the impeller balanced before shipment? | |
| The impeller is put on the dynamic balancing machine before it is packed, and if the customer needs the record, it can be supplied together with the other inspection documents. | |
| Q: Can you copy a worn impeller? | |
| A worn impeller or a 3D scan can be used as a reference. We check the vane profile, bore and keyway before quoting, and confirm the critical dimensions with the customer. | |
| Q: Can you machine the bore and keyway to my drawing? | |
| Yes. The bore, keyway and vane profile are CNC machined to the drawing. A first-off part is checked before serial production. |


